Main Window 10
NetworkAmp Manager—Owner’s Manual
3 Touring NetworkAmp Manager
Main Window
This is NetworkAmp Manager’s main window. The left pane displays the CobraNet net-
work tree, consisting of ACU16-Cs, NHB32-Cs, and power amps. The right pane displays
the various NHB and ACU pages. The name and unit ID of the device currently selected in
the network tree are displayed at the top of the right pane. If it’s an ACU16-C, “ACU - name
[Unit ID]” is displayed. If it’s an NHB32-C, “NHB - name [Unit ID]” is displayed. You can
set the device names in NetworkAmp Manager (see page 13). Unit IDs are set on the actual
devices.
To Next Page
Loading...
Need help?
General