31
“Transmit Dialog”
Voice data can be transmitted in bulk to your synthesizer. Select the bulk voice data you wish to
receive, then click [Start]. The progress bar shows how much of the data has been transmitted.
Finally, click the [Close] button to quit the dialog.
n When transmitting user voice data to the MOTIF ES6/7/8, user voice data in the MOTIF ES6/7/8 will
be overwritten. Exercise caution so as not to accidentally overwrite a User voice that you have used in
another Multi configuration.
n When the User Voice of any given part is already selected, transmit the Multi settings to the MOTIF
ES6/7/8 after you bulk transmit the User Voice data. By transmitting the Multi settings you can play the
MOTIF ES6/7/8 the newly transmitted voice data.
n Transmission time can be set under “Dump Interval” on the “Setup dialog” (page 30).
1 Tr ansmit Type ..................Click this and select which user voice data to transmit to the MOTIF
ES6/7/8.
Normal User 1+2+Drum ......... All Normal User voices and Drum voices
Normal User 1 ........................ All Normal User 1 voices
Normal User 2 ........................ All Normal User 2 voices
Normal User 1+2 .................... All Normal User voices
Drum User .............................. All Drum User voices
n Voice data for optional plug-in boards can not be transmitted.
2 Progress Bar ...................Indicates how much of the data has been transmitted.
3 Start ................................ Click this to begin the transmission. Once transmission has started,
this button changes to a [Stop] button. Clicking [Stop] will stop the
transmission.
4 Close............................... Click this to close this dialog.
n The MIDI Device Number has to be set correctly in order to transmit bulk data. For further details, see
page 30.
1
2
4
3
To Next Page
Loading...
Need help?
General
