Yamaha MT100 - Specifications

SPEClFlCATlONS
TAPE TRANSPORT
Tape Type
Heads
Tape Speed
Pitch Control
Wow & Flutter
Rewind Time
Motor
CONNECTORS
Input 1 & 2
Input 3 & 4
Aux Return
Stereo L & R
Phones Out
Tape Out 1 to 4
Aux Send
Chrome (70 microsec. EQ)
4-channel
Permalloy rec/play head
4-channel ferrite erase head
4.75 cm/sec., 9.5 cm/sec.
± 10%
Less than 0.05% WRMS
Approx. 100 sec., for C-60 tape
DC servo motors (2)
Input Impedance
10 k-ohms
Rated Input Level
-10 dB to -50 dB (fader nominal)
Max. Input Level
+10 dB (trim min.)
Min. Input Level
-56 dB (trim, fader max.)
Input Impedance
10 k-ohms
Rated Input Level
-10 dB (fader nominal)
Min. Input Level
-16 dB (fader max.)
Input Impedance
10 k-ohms
Rated Input Level
-10 dB (fader nominal)
Min. Input Level
-16 dB (fader max.)
Output Impedance
1 k-ohm
Load Impedance
Greater than 10 k-ohms
Rated Output Level
-10 dB into 50 k-ohms
Load Impedance
8 to 40 ohms
Max. Output Level
100 mW + 100 mW/40 ohms
Output Impedance
1 k-ohm
Load Impedance
Greater than 10 k-ohms
Rated Output Level
-20 dB into 50 k-ohms
Output Impedance
1 k-ohm
Load Impedance
Greater than 10 k-ohms
Rated Output Level
-10 dB into 50 k-ohms
ELECTRICAL SPECIFICATIONS
Frequency Response
40 Hz to 18 kHz, ± 3 dB at 9.5 cm/sec.
40 Hz to 12.5 kHz, ± 3 dB at 4.75 cm/sec.
S/N ratio
85 dB, dbx ON, IHF-A
Distortion
Less than 7%. 315 Hz
Channel Separation
Greater than 55 dB at 1 kHz
Erasure Ratio
Greater than 70 dB at 1 kHz
Noise Reduction
dbx
*
GENERAL
Power Requirements
(PA-100 AC Adapter)
Dimensions (WxHxD)
Weight
U.S. & Canadian Models: 120 V AC, 60 HZ
General Model: 220/240 V AC, 50/60 Hz
382 x 65 x 205 mm (15” x 2-l/2” x 8”)
2.5 kg (5.5 Ibs)
* dbx is a trademark of dbx Incorporated.
0 dB = 0.775 Vr.m.s.
All specifications subject to change without notice.
20 MT100 MULTITRACK CASSETTE RECORDER