EasyManuals Logo
Home>Yamaha>Cassette Player>MT4X

Yamaha MT4X User Manual

Yamaha MT4X
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
7
Controls and Connections
User’s Guide
ODD/L: Rotated fully counter-clockwise sends the signal to the odd (1 or 3) numbered track of the
selected track group (ASSIGN keys
4
) and to the left channel of the STEREO bus.
EVEN/R: Rotated fully clockwise sends the signal to the even (2 or 4) numbered track of the
selected track group (ASSIGN keys) and to the right channel of the STEREO bus.
6
Input select (TAPE - MIC/LINE) key
This key selects the input source for the channel. Pressed in ( ), it selects the tape track
corresponding to the channel module (for example, the channel 1 key selects track 1). In the out
position ( ), the source is the MIC/LINE INPUT connector (
h
).
7
Channel fader
This linear control is used to set the channel level. For optimal performance and signal balance, the
fader should be positioned between 7 and 8.
Master Module
8
AUX RETURN - ASSIGN keys
These keys assign the signal from the AUX RETURN connectors
(
i
) to the selected group bus.
9
Auxiliary return LEVEL controls
These rotary controls adjust the level of the auxiliary return
signal.
0
MONITOR SELECT keys
These keys are used to select the group buses, the stereo bus,
and the cue bus signals. The signals are routed to the
MONITOR OUT (
f
) connectors on the rear panel and the
stereo PHONES (
d
) connector on the front of the MT4X.
GROUP
: These keys select groups 1 and 3 and groups 2 and 4
respectively. If you select both keys, groups 1 and 3 will be sent
to the left channel and groups 2 and 4 will be sent to the right
channel.
STEREO
: This key selects the stereo bus signal.
CUE
: This key selects the cue bus signals. These are the playback
signals direct from the cassette tracks. When you are recording,
the record signal is monitored.
A
CUE LEVEL controls
These rotary controls adjust the level of the signal from each
track before it is sent to the cue bus.
B
MONITOR/PHONES level control
This rotary control adjusts the volume level of the stereo
PHONES (
d
) connector and the MONITOR OUT (
f
)
connectors.
MASTER
1
2
3
4
GROUP
1
3
2
4
ASSIGN
1
3
2
4
ASSIGN
12
AUX RETURN
LEVEL
10
9
8
7
6
5
4
3
2
1
0
10
9
8
7
6
5
4
3
2
1
0
1
3
2
4
010
010
010
010
010
010
MIN MAX
CUE LEVEL
MONITOR
SELECT
STEREO
CUE
MONITOR/PHONES
C
B
0
9
8
A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha MT4X and is the answer not in the manual?

Yamaha MT4X Specifications

General IconGeneral
BrandYamaha
ModelMT4X
CategoryCassette Player
LanguageEnglish

Related product manuals