P-105 Owner’s Manual
19
Backup Data and Initializing
The following data will be maintained as backup data
even if you turn off the power.
Backup data
Metronome/Rhythm Volume, Metronome/Rhythm
selection (Beat or Rhythm number), Touch Sensi-
tivity, Tuning, Split Point, Pianist Style Volume,
Auto Power OFF, Damper Resonance on/off,
I.A.Control on/off, I.A.Control Depth, User Song
To save the User Song data to a computer:
Among the backup data listed above, only the User
Song data can be transferred to a computer and saved
as a SMF file. For details, refer to “Computer-related
Operations” on the website.
To initialize the backup data:
While holding down the C7 key (right-most key), turn
the power on to initialize the backup data to the fac-
tory initial settings.
Both the [REC] and [PLAY] lamps flash, indicating
that the initialization is being executed. After the
operation is completed, both lamps turn off.
Auto Power Off Function
To prevent unnecessary power consumption, this function automatically turns the power off if no buttons or keys
are operated for approximately 30 minutes. If desired, you can disable or enable this function.
To disable Auto Power Off:
When the instrument is turned off:
While holding down the lowest key, press the [ ]
(Standby/On) switch to turn on the power so that the
power indicator flashes three times, after which the
Auto Power Off is disabled.
When the instrument is turned on:
While holding down [DEMO/SONG] and [METRO-
NOME/RHYTHM] simultaneously, press the A-1
key.
To enable Auto Power Off:
While holding down [DEMO/SONG] and [METRO-
NOME/RHYTHM] simultaneously, press the A#-1
key.
• Never turn off the power while the initialization is being
executed.
• If this instrument somehow malfunctions or fails to operate properly, try execut-
ing the initialization.
NOTE
To Next Page
Loading...
Need help?
General
