P-60 Selecting & Playing Voices
ENGLISH
19
Adding Variations to the Sound – Reverb
This control enables you to select various digital reverb effects that add extra depth and expression
to the sound to create a realistic acoustic ambience.
When you select a reverb, the reverb is automatically turned on.
While holding down the [VOICE] button, press one of the C2–E2 keys to select a reverb
type.
Adjusting Reverb Depth
Adjust the reverb depth for the selected voice by pressing one of the C3–G
4 keys while
holding down the [VOICE] button. The depth range is from 0 through 20.
Procedure
KeyReverb Type Description
C2 Room This setting adds a continuous reverb effect to the sound, similar to
the acoustic reverberation you would hear in a room.
C
2 Hall1 For a “bigger” reverb sound, use the HALL 1 setting. This effect sim-
ulates the natural reverberation of a small-size concert hall.
D2 Hall2 For a truly spacious reverb sound, use the HALL 2 setting. This effect
simulates the natural reverberation of a large concert hall.
D
2 Stage Simulates the reverb of a stage environment.
E2 Off No effect is applied.
C2 D2 E2
C 2
D 2
The lowest key
VOICE
TIP
The default reverb type (includ-
ing OFF) and depth settings are
different for each voice.
TIP
depth 0: no effect
depth 20: maximum reverb
depth
C3: depth 0
G 4: depth 20
The lowest key
VOICE
The depth value increases as you press higher keys.
To Next Page
Loading...
Need help?
General
