EasyManuals Logo

Yamaha RX-V450 User Manual

Yamaha RX-V450
73 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
32
PLAYBACK
Downmixing to 2 channels
You can enjoy 2-channel stereo playback even from multi-
channel sources.
Press PROGRAM l / h repeatedly (or press
STEREO on the remote control) to select 2ch
Stereo.
2ch Stereo
y
You can use a subwoofer with this program when SWFR or
BOTH is selected in “BASS OUT”.
Listening to unprocessed input signals
In STRAIGHT mode, two channel stereo sources are
output from only the front left and right speakers. Multi-
channel sources are decoded straight into the appropriate
channels without any additional effect processing.
Press STRAIGHT to select STRAIGHT.
STRAIGHT
Press STRAIGHT again so that “STRAIGHT” disappears
from the display when you want to turn the sound effect
back on.
Virtual CINEMA DSP
Virtual CINEMA DSP allows you to enjoy the CINEMA
DSP programs without surround speakers. It creates
virtual speakers to reproduce the natural sound field.
If you do not connect surround speakers, Virtual CINEMA
DSP activates automatically whenever you select a
CINEMA DSP sound field program.
Virtual CINEMA DSP will not activate, even when “SURR LR”
is set to NONE (see page 50) in the following cases:
When MULTI CH INPUT is selected as the input source.
When headphones are connected to the PHONES jack.
This unit comes with a variety of input jacks. Do the
following to select the type of input signals you want to
use.
1 Rotate INPUT to select the input source.
2 Press INPUT MODE to select an input mode.
In most cases, use AUTO.
AUTO Automatically selects input signals in
the following order:
1) Digital signals
*
2) Analog signals
DTS Selects only digital signals encoded in
DTS. If no DTS signals are input, no
sound is output.
ANALOG Selects only analog signals. If no
analog signals are input, no sound is
output.
* If this unit detects a Dolby Digital or DTS signal, the
decoder automatically switches to the appropriate sound
field program.
y
You can adjust the default input mode this unit selects when the
power is turned on (see page 52).
Note
MUTE
SET MENU
LEVEL
STRAIGHT
ROCKJAZZHALL
STEREO
4321
8
10
7
09
65
ENTER
MOVIETV THTRMUSIC ENTERTAIN
EX/ES
NIGHTq/DTS
Front panel
or
l PROGRAM h
Remote control
EFFECT
STRAIGHT
STRAIGHT
ENTER
Front panel
Remote control
or
Selecting input modes
INPUT
INPUT MODE
CDTUNER
MD/CD-R
DVD
HiFi DSP
DTV/CBL
V-AUXVCR
96
24
q
PL
q
EX
MATRIX DISCRETE
SILENT CINEMA NIGHT
ZONE2
PTY HOLD AUTO
PS RT CT EONPTY
TUNED STEREO MUTE
VOLUME
MEMORY
SLEEP
VIRTUAL
PCM
q
PL
q
PL x
A B
SP
ft
mS
dB
dB
96/24
LFE
L C R
SL SB SR
q
DIGITAL
t
01DDVDD AUTO00
Input modeInput source
01EN_00_RXV450_EB.book Page 32 Thursday, February 5, 2004 6:17 PM

Table of Contents

Other manuals for Yamaha RX-V450

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha RX-V450 and is the answer not in the manual?

Yamaha RX-V450 Specifications

General IconGeneral
Channels6.1
Signal-to-Noise Ratio100 dB
Input Impedance47 kOhm
Input Sensitivity200 mV
Audio D/A Converter24-bit/192 kHz
Surround System Class6.1 channel
Digital Sound Processor (DSP)Yes
Tuner BandsAM/FM
Preset Station Qty40
Frequency Response10Hz-100kHz
Total Harmonic Distortion0.06 %
Inputs4 x Audio
Outputs1 x Audio (RCA), 1 x Video (Composite)
Built-in DecodersDolby Digital, DTS
Surround Sound EffectsDolby Pro Logic II
Tuning RangeFM: 87.5 - 108 MHz
Connector TypeRCA
Amplifier Output Details85 W (Front), 85 W (Center), 85 W (Surround), 85 W (Surround Back)
DSP Presets7ch stereo, Concert hall, Disco, Game, Jazz club, Movie, Stadium

Related product manuals