Yamaha RX-V450 User Manual

RESETTING THE FACTORY PRESETS
65
English
ADDITIONAL
INFORMATION
If you want to reset all of your unit’s parameters for any
reason, do the following. This procedure completely resets
ALL parameters, including the SET MENU, level, assign
and tuner presets.
Be sure this unit is in standby mode.
1 Hold down STRAIGHT on the front panel and
press STANDBY/ON.
“FACTORY PRESET” appears in the front panel
display.
y
To cancel the initialization procedure without making any
changes, press STANDBY/ON.
2 Press STRAIGHT to select the desired
setting.
Reset To reset the unit to its factory presets.
Cancel To cancel without making any changes.
3 Press STANDBY/ON to confirm your
selection.
If you selected “Reset”, the unit is reset to its factory
presets and switches to standby mode.
If you selected “Cancel”, the unit switches to standby
mode and nothing is reset.
RESETTING THE FACTORY PRESETS
VOLUME
AUTO/MAN'L MONO
VIDEO L AUDIO R
MAN'L/AUTO FMLEVELNEXTEDIT
EFFECT
MEMORY
FM/AMPRESET/TUNING
A/B/C/D/E
l PROGRAM h
BASS/TREBLE
l PRESET/TUNING h
TUNING MODE
INPUT MODE
CONTROL
STRAIGHT
SPEAKERSPHONES
SILENT CINEMA
STANDBY
/ON
BA
MULTI CH
INPUT
VIDEO AUX
INPUT
STANDBY/ON
STRAIGHT (EFFECT)
(U.S.A. model)
01EN_00_RXV450_EB.book Page 65 Thursday, February 5, 2004 6:17 PM

Yamaha RX-V450 Specifications

General

Channels	6.1
Signal-to-Noise Ratio	100 dB
Input Impedance	47 kOhm
Input Sensitivity	200 mV
Audio D/A Converter	24-bit/192 kHz
Surround System Class	6.1 channel
Digital Sound Processor (DSP)	Yes
Tuner Bands	AM/FM
Preset Station Qty	40
Frequency Response	10Hz-100kHz
Total Harmonic Distortion	0.06 %
Inputs	4 x Audio
Outputs	1 x Audio (RCA), 1 x Video (Composite)
Built-in Decoders	Dolby Digital, DTS
Surround Sound Effects	Dolby Pro Logic II
Tuning Range	FM: 87.5 - 108 MHz
Connector Type	RCA
Amplifier Output Details	85 W (Front), 85 W (Center), 85 W (Surround), 85 W (Surround Back)
DSP Presets	7ch stereo, Concert hall, Disco, Game, Jazz club, Movie, Stadium