16
Connections
This section explains how to use the UX16 to connect your MIDI devices (tone
generator or keyboard, etc.) to your computer.
1. Connections to your computer
Connect the USB cable to the USB terminal of your computer (or USB hub). It
is not necessary to turn off the power of your computer before doing so.
2. Connections to MIDI devices
Turn off the power of your MIDI devices before connecting them. Connect
the MIDI OUT cable of the UX16 to the MIDI IN terminal of your MIDI
device, and connect the MIDI IN cable to the MIDI OUT terminal of your
MIDI device.
IN
OUT
See page 8 for information
on installing the driver.
Computer
MIDI device
To Next Page
Loading...
Need help?
General
