Yamaha UX16 User Manual

8
Installing the Driver
To operate the UX16, you need to install the driver on the computer correctly.
The USB-MIDI driver is software that transmits MIDI signals back and forth
between sequence software and the UX16 via a USB cable.
Windows 2000 users → See page 8.
Windows XP users → See page 9.
Windows Vista users → See page 10.
Mac OS X users → See page 13.
Windows users:
● Installing the USB-MIDI Driver on a Windows 2000 Computer
Do not connect the UX16 to your computer until you are instructed to do so in the
following procedure.
You must log into Windows as the Administrator (using the computer’s administrator
account) to install the USB-MIDI driver.
1. Insert the CD-ROM included in the package into the CD-ROM drive on your
computer.
The system displays the UX16 Driver Installation Utility panel.
If the system does not display the UX16 Driver Installation Utility panel, double-click
“My Computer,” then right-click the CD-ROM drive icon. The system displays a pop-up
menu. Select [Open] from the pop-up menu, then double-click the “Start_E.exe” file.
2. Click [Install].
3. Connect the UX16 to the computer.
The system automatically launches the Found New Hardware Wizard.
Some computers may take a while to display the Wizard window.
Click [Next].
USB cable
UX16
Sequence
software
Driver
Computer
NOTE
NOTE
NOTE
NOTE

Yamaha UX16 Specifications

General

Connector 1	USB
Connector 2	MIDI
Connector 1 gender	Male
Product color	Blue
Quantity per pack	1 pc(s)