Yamaha VZ175 User Manual

Instruments and indicators
33
EMU36110
Start-up checks
Place the remote control lever in neutral and
turn the main switch to “ ” (on). After all the
displays come on and the total hour display
comes on, the gauge will change to normal
operation. If the buzzer sounds and the wa-
ter separator-alert indicator blinks, consult
your Yamaha dealer immediately.
TIP:
To stop the buzzer, press the “ ” (set) or
“ ” (mode) button.
EMU36260
Oil level alert
When the oil level is low while cruising, the oil
level-alert indicator will start to blink. The en-
gine speed will automatically decrease to
about 2000 r/min.
1. Tachometer
2. Trim meter
3. Multifunction display
4. Cooling water pressure
5. Cooling water/engine temperature
6. Water detection-alert indicator
7. Battery voltage
8. Oil level (2-stroke models)
1. Set button
2. Mode button
2
3
1
4
5
6
7
8
ZMU05452
2
1
ZMU05417
1. Tachometer
2. Trim meter
3. Multifunction display
4. Water detection-alert indicator
5. Engine trouble alert/maintenance indicator
6. Cooling water pressure
7. Oil level (2-stroke models)
8. Cooling water/engine temperature
9. Battery voltage
1452
3
6978
ZMU05453
68J-9-1G.book 33 ページ ２０１１年１２月１６日 金曜日 午後１２時４分
©2019 Yamaha Motor Corporation, U.S.A.

Yamaha VZ175 Specifications

General

Brand	Yamaha
Model	VZ175
Category	Outboard Motor
Language	English