Yamaha VZ175 User Manual

Operation
52
1. Place the remote control lever in “ ”
(neutral).
TIP:
The start-in-gear protection device prevents
the engine from starting except when in neu-
tral.
2. Attach the engine shut-off cord to a se-
cure place on your clothing, or your arm
or leg. Then install the clip on the other
end of the cord into the engine shut-off
switch.
3. Turn the main switch to “ ” (on).
TIP:
Dual engine users: When the main switch is
turned on, the buzzer operates for a few sec-
onds then stops automatically. The buzzer
also operates if one of the engines stalls.
4. Turn the main switch to “ ” (start),
and hold it for a maximum of 5 seconds.
5. Immediately after the engine starts, re-
lease the main switch to return it to “ ”
(on). NOTICE: Never turn the main
switch to “ ” (start) while the en-
gine is running. Do not keep the start-
er motor turning for more than 5
seconds. If the starter motor is turned
continuously for more than 5 sec-
onds, the battery will be quickly dis-
charged, thus making it impossible to
start the engine. The starter can also
be damaged. If the engine will not
start after 5 seconds of cranking, re-
turn the main switch to “ ” (on), wait
10 seconds, then crank the engine
again.
[ECM00192]
OFF
ON
ZMU01880
68J-9-1G.book 52 ページ ２０１１年１２月１６日 金曜日 午後１２時４分
©2019 Yamaha Motor Corporation, U.S.A.

Yamaha VZ175 Specifications

General

Brand	Yamaha
Model	VZ175
Category	Outboard Motor
Language	English