1
2
3
4
5
6
7
8
9
10
11
8-5
JC2
Engine Oil Replacement
1. Warm up the engine for several
minutes, place the golf car on a
level surface, then stop the
engine.
Use caution not to touch hot
engine oil or hot engine parts, dur-
ing the following procedure. Death
or serious personal injury can
result from failing to comply with
the safety instructions in this man-
ual.
2. Place an oil pan under the engine
drain plug.
3. Remove the oil drain plug and let
the oil drain completely.
TIP
Dispose of used oil in an
environmentally safe way, such as
taking oil to an oil collection station.
4. Install the drain plug, along with
a new drain plug gasket, finger-
tight before tightening to the
following torque:
Drain plug torque:
31 Nm, 3.1 m
.
kg
(23 ft
.
lb)
5. Add the correct quantity of oil
through the oil filler hole.
TIP
Recommended engine oil
classification: API Service SE, SF, or
SG. Engine oils labeled “Energy
Conserving II” are recommended.
Recommended oil:
YAMALUBE 4-cycle oil or 10W30
Engine oil capacity:
1.0 L, 1000 cc
(1.0 US qt)
Oil change quantity:
1.0 L, 1000 cc
(1.0 US qt)
Y-624
MAINTENANCE
To Next Page
Loading...
Need help?
General
