En 24
CONNECTIONS
Setting up speaker parameters
STEP 4: Playback a test tone
10
Press jCursor C repeatedly to display
“Test Tone” and press jENTER.
11
Use jCursor D / E to select “On.”
A test tone plays back as soon as you select “On.”
The test tone plays back in a clockwise fashion, as
follows.
12
Check that the test tone is playing back
and press jRETURN.
Return to the previous menu.
This completes step 4.
STEP 5: Adjust the volume
13
Press jCursor B repeatedly to display
“Level” and press jENTER.
14
Use jCursor B / C to switch the speaker
that is outputting the test tone, looking
for speakers with a different volume level
to the others.
The front panel display shows the speaker that is
outputting the test tone. J1
15
If you find a speaker with a different
volume level to the others, use jCursor
D / E to adjust the volume. Use Front
speaker L or R as a default when
adjusting volumes.
To raise the volume: Press jCursor E.
To lower the volume: Press
jCursor D.
16
Repeat steps 14 and 15 to adjust the
volume balance for all speakers to your
preference.
17
Press jRETURN when setting is
complete.
Return to the previous menu.
This completes step 5.
18
Repeat procedures 10-12 (step 4) to stop
playback of the test tone.
19
Once you have completed all settings,
press iSETUP to close the Setup menu.
SETUP
RETURN
ENTER
EC
TV V
L TV
NPUT
M
TE
RECEIVER
ENE
PTI
L
ME
ENHAN
E
R. DE
DE
TRAI
HT
DMI
UDI
TRAN
MIT
LEE
V-A
X
NF
EM
RY
RE
ET
T
NIN
VI
I
TERE
VD
D
ADI
T
T
P
P-
DI
PLAY
R
DE
ET
D
A
B
j
i
iSETUP
jCursor B / C / D / E
jENTER
jRETURN
SW
C
L
SL SR
R
>OffOn
TEST
VOL.
Front L Front R
Center
Subwoofer
Surround L Surround R
Information Speakers
FL Front speaker L
FR Front speaker R
C Center speaker
SL Surround speaker L
SR Surround speaker R
SWFR Subwoofer
SW
C
L
SL SR
R
FL----d----
d
LEVEL
VOL.
J
1 : Only speakers configured for use in procedure 5 output the test
tone.