10
FLOOR PANELS
2" (5,1 cm)
PARTS REQUIRED:
GAUGE BLOCK
GAA
3/4" x 48" x 96"
(1,9 x 121,9 x 243,8 cm)
To draw panels tight
at seams angle nail.
Flush
1
1
1
1
Block
Block
6"
(15,2 cm)
6"
(15,2 cm)
12" (30,5 cm)
48"
(121,9 cm)
Install a panel ush to the outside edges of the oor frame.
Use GAA gauge block to maintain 3/4” on oor joist.
Secure panel using 2" nails 6" apart on edges and 12” apart inside panel.
Flush
Flush
Flush
Flush
Flush
12" (30,5 cm)
Install next two panels on frame and ush to the installed panel and outside of frame.
Use GAA gauge block to maintain 3/4” on oor joist.
Secure panel using 2" nails 6" apart on edges and 12" apart inside panel.
To Next Page
Loading...
Need help?
General
