model no. 054-5745-0 | contact us: 1.866.523.5218 model no. 054-5745-0 | contact us: 1.866.523.5218
29
!
WARNING: When servicing, use only identical
YardWorks
TM/MC
replacement parts. Use of any other parts
may create a hazard or cause product damage.
!
WARNING: Always wear safety goggles or safety glasses
with side shields that complies with ANSI Z87.1 during
power tool operation or when blowing dust. If operation is
dusty, also wear a dust mask.
!
WARNING: Do not let brake fluids, gasoline, petroleum-
based products, penetrating lubricants, etc., come into
contact with plastic parts at any time. Chemicals can
damage, weaken or destroy plastic, which may result in
serious personal injury.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage
from various types of commercial solvents. Use a clean cloth to remove dirt, dust, lubricant,
grease, etc.
LUBRICATION
All of the bearings in this product are lubricated with a sufficient amount of high-grade lubricant
for the life of the unit under normal operating conditions. Therefore, no further lubrication is
required.
Maintenance
To Next Page
Loading...
Need help?
General
