model no. 060-1984-8 | contact us: 1.866.523.5218
14” (36 CM) BRUSHLESS GRASS TRIMMER
1
Quick Start Guide
1. ASSEMBLING THE UPPER SHAFT AND LOWER SHAFT
Connect the couplings together. (See Fig. A1)
Align the holes and fasten the couplings by tightening the bolt with hex key. (See Fig. A2)
2. ASSEMBLING THE AUXILIARY
HANDLE
Place the auxiliary handle onto the shaft
from the top, and align with the anti-vibration
circle on the shaft. Secure the auxiliary
handle by tightening the four bolts with the
hex key. (See Fig. B)
3. ASSEMBLING THE SAFETY GUARD
Attach the safety guard to the trimmer head. Align the guard so it slides into the slots
located on the trimmer head. (See Fig. C1)
Secure the safety guard onto the trimmer head with the bolts provided by using hex key.
(See Fig. C2)
Please put the hex key back to the top notch of grass trimmer after use, so it will not get
lost. (See Fig. C3)
A1
B
C2
C1
A2
* This information is provided for your convenience. It does not replace the instruction manual
and safety instructions. The manual and safety instructions need to be read and understood in
their entirety.
To Next Page
Loading...
Need help?
General