YASKAWA CIPR-GA70C Series Initial Steps

9 Mechanical Installation
YASKAWA ELECTRIC TOEP C710617 17D YASKAWA AC Drive GA700 Initial Steps EN 15
5. Carefully pull forward to remove the front cover.
A - Keypad connector
B - Hook
C - Connector holder
Figure 9.5 Remove the Front Cover
6. Remove the wiring cover before wiring the main circuit terminal.
A - Wiring cover
■ Remove the Terminal Cover
1. Loosen the screws on the terminal cover.
2. Pull down on the cover.
3. Pull forward on the terminal cover to free it from the drive.
Figure 9.6 Removing the Terminal Cover
EN

YASKAWA CIPR-GA70C Series Specifications

General

Brand	YASKAWA
Model	CIPR-GA70C Series
Category	DC Drives
Language	English