Yealink EXP20 User Manual

Configuring the Yealink EXP20 LCD Expansion Module
25
If you leave this field blank, the LCD screen of the EXP20 LCD expansion module will
display the default label “FWD”.
5. Click Confirm to accept the change.
You can configure an Ext key as the transfer key. Then you can perform a Blind,
Semi-Attended or Attended transfer by pressing the transfer key during a call.
To configure an Ext key as the transfer key:
1. Click on DSSKey->Ext Key.
2. In the desired Ext key field, select Transfer from the pull-down list of Type or leave it
blank.
3. Enter the destination number you want to transfer the calls to in the Value field or
leave it blank.
If a destination number is configured, the active call will be directly transferred by
pressing the transfer key without consulting.
4. Enter the desired value in the Label field or leave it blank.

Yealink EXP20 Specifications

General

Handset type	-
Product type	IP Phone
Product color	Black
Backlight display	Yes
Display resolution	160 x 320 pixels
Lines quantity	- lines
Phonebook capacity	- entries
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Number of handles included	- pc(s)
Certification	CE, RoHS
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	110 mm
Width	112 mm
Height	143 mm