Yealink SIP-T23G Auto Provisioning Guide

Triggering the IP Phone to Perform Auto Provisioning
41
3. Enter the desired interval time (in minutes) in the Interval(Minutes) field.
4. Click Confirm to accept the change.
Weekly
The IP phone performs auto provisioning at a random time every week/month/quarter. You can
configure what time of the day and which day of the week to trigger the IP phone to perform
auto provisioning. You can also configure a regular week interval to trigger the IP phone to
perform auto provisioning. You can specify the delay time to perform auto provisioning when
the IP phone is inactive at regular week. For example, you can configure the IP phone to check
and update new configuration only when the IP phone has been inactivated for 10 minutes
between 2 to 3 o’clock in the morning every Monday at a 4-week interval.
If you configure two or more days in a week, the auto provisioning only occurs at a random day.
To activate the weekly mode via web user interface:
1. Click on Settings->Auto Provision.
2. Mark the On radio box in the Weekly field.
3. Enter the desired upgrade interval in the Weekly Upgrade Interval(0~12week) field.
4. Enter the desired value in the Inactivity Time Expire(0~120min) field.
5. Enter the desired time in the Time field.

Yealink SIP-T23G Specifications

General

Backlight	Yes
Voice codecs	G.711a, G.722.2, G.726, G.729ab, iLBC
Volume control	Digital
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Silver
Display resolution	132 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Networking standards	IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3af
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output current	0.6 A
AC adapter output voltage	5 V
Power consumption (typical)	1.56 W
Number of handles included	- pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	188 mm
Width	209 mm
Height	150 mm