EasyManuals Logo
Home>Yealink>IP Phone>SIP-T4U Series

Yealink SIP-T4U Series User Manual

Yealink SIP-T4U Series
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #393 background imageLoading...
Page #393 background image
Call Features
390
Default
Blank
Supported
Devices
All phones except T19(P) E2 and CP920
Web UI
Features > Forward& DND > DND > AccountX > Off Code
Phone UI
Menu > Features > DND > AccountX > Off Code
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42U/T42G/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21
(P) E2, X=1-2.
DND Synchronization for Server-side Configuration
DND synchronization feature provides the capability to synchronize the status of the DND features between the IP
phone and the server.
If the DND is activated in phone mode, the DND status changing locally will be synchronized to all registered
accounts on the server; but if the DND status of a specific account is changed on the server, the DND status locally
will be changed.
The following table lists the parameters you can use to configure DND synchronization for server-side.
Parameter
features.feature_key_sync.enable <y0000000000xx>.cfg
Description
It enables or disables to synchronize the feature status between the IP phone and the server.
Permitted
Values
0-Disabled
1-Enabled, the phone sends a SUBSCRIBE message with event “as-feature-event”.
Default
0
Parameter
account.X.feature_key_sync.enable
[1]
<MAC>.cfg
Description
It enables or disables to synchronize the feature status between the IP phone and the server for
account X.
Note: The value configured by this parameter takes precedence over that configured by the parameter
"features.feature_key_sync.enable".
Permitted
Values
0-Disabled
1-Enabled, the phone to send a SUBSCRIBE message with event “as-feature-event”.
Default
0
Supported
Devices
All phones except T48G, T46G, T42G, T41P, T29G and CP920
Parameter
features.dnd.feature_key_sync.enable <y0000000000xx>.cfg
Description
It enables or disables the DND feature synchronization.
Note: It works only if “features.feature_key_sync.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled, server-based DND is enabled. Server and local phone DND are synchronized.
Default
1
Supported
Devices
All phones except CP920
Parameter
account.X.dnd.feature_key_sync.enable
[1]
<MAC>.cfg

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T4U Series and is the answer not in the manual?

Yealink SIP-T4U Series Specifications

General IconGeneral
BrandYealink
ModelSIP-T4U Series
CategoryIP Phone
LanguageEnglish

Related product manuals