Yealink SIP-T58A User Manual

MUTE: Turns off your Microphone (Speaker, Handset + Headset) to allow you to speak privately. The caller cannot overhear
office/background noise or conversations.
+ TO USE: Press the MUTE Key. A mute symbol appears on the display, speak privately.
+ TO RESUME CONVERSATION: Press the MUTE Key again.
HOLD: This is an exclusive hold to your telephone. No one else can retrieve it.
++ TO HOLD A CALL: Tap HOLD on display or the HOLD Key on phone.
++ TO RETURN TO CALLER: Tap the LINE KEY or Tap the RESUME Key or Press the HOLD Key again.
VIDEO: Turns an audio call into a video call with another subscriber in your business group.
+ On the In Call Screen, scroll to the left and tap Add Video.
+ Screen says “Requesting Video Call”. Caller can accept or decline the video invitation.
11
KEY
FEATURE
NAVIGATING A CONNECTED CALL
SPEAKER: Press to make or answer any call without lifting the Handset.
+ TO SWITCH TO SPEAKER FROM HEADSET/HANDSET: Press the SPEAKER Key, replace handset in cradle.
+ TO RESUME PRIVACY: Lift the Handset or Press the HEADSET Key.
Need support? Connect with us at www.northland.net/support or
Dial 4357 (HELP) or 315-671-6262 to speak to a Northland Training Representative
IN CALL SCREENS
TRANSFER
TRANSFER allows you to connect your call to someone else (with call on line)
Announced: Tap either the TRANSFER Key on the display or Press the TRANSFER Key on the phone.
The current call is automatically placed on hold.
Enter the Number you are transferring to and tap SEND.
Wait for the person to answer, announce the call.
+ TO COMPLETE TRANSFER: Tap TRANSFER, call is connected, hang up.
+ TO RETURN TO HELD CALL: Tap END CALL, tap the held line, tap RESUME.
Blind Transfer: Tap the TRANSFER Key on the display or press the Transfer key on the phone.
The current call is automatically placed on hold.
Enter the number and tap TRANSFER again.
TRANSFER TO VOICEMAIL: Sends a caller directly to voicemail without ringing the phone
+ Tap the TRANSFER Key on the display or press the TRANSFER Key on the phone.
+ The current call is automatically placed on hold.
+ Press *99 and enter the Extension Number.
+ Tap TRANSFER and then tap TRANSFER again immediately.

Yealink SIP-T58A Specifications

General

Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Operating system version	5.1.1
Operating system installed	Android
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Bluetooth	No
Security algorithms	SRTP
Networking standards	IEEE 802.1x
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP/TFTP/HTTP/HTTPS, IPv4/IPv6, UDP/TCP/DNS-SRV
USB 2.0 ports quantity	2
Voice codecs	G.711Mu, G.711a, G.722, G.722.1, G.722.1C, G.723, G.726, G.729ab, iLBC
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Front camera resolution (numeric)	2 MP
Base station keys	27
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
Power consumption (typical)	1.9 W
Operating temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	220 mm
Width	259.4 mm
Height	239 mm
Package depth	293 mm
Package width	324 mm
Package height	128 mm