Dialling from the Directory
Press the Phone Book button
Select Local Directory
Select Contact List
Use the navigation Up/Down key to highlight the entry you want dial.
Press the OK button.
Making a call
To make a phone call:
Pick up the handset, icon will be showed in the idle screen.
Press the Speaker button, icon will be showed in the idle screen.
Press the Speaker button then the Headset button if the headset
is connected to the Headset Port in advance.
You can also dial the number first, and then choose the method you
will use to speak to the other party.
Placing a Call on Hold
While on an active call, press the Hold button.
To retrieve the held call, press the Hold button again.
To active a 2
nd
call:
Place the 1
st
call on Hold.
Press Line 2 key.
Dial the number and press OK.
Toggle between held calls using the navigation Up/Down button
and press Hold to reconnect to the caller
Answering a call
Answering an incoming call
If you are not on an active call, lift the handset, press the Speaker to
answer using the speakerphone or press the Speaker button to answer
using the headset.
If you are on an active call, press the flashing Line 2 key to answer the
2
nd
call. This will place the 1
st
call on Hold and you can toggle between
the calls by using the navigation Up/Down button and pressing Hold.
Note: During the conversation, you can alternate between Headset, Handset and
Speakerphone by pressing the corresponding buttons or picking up the handset.
Created By Dale Ellwood 6 Vox_Yealink_SIP-T20P_V2
To Next Page
Loading...
Need help?
General
