YOKOGAWA ADMAG AXG Series User Manual

<5. Basic Operating Procedures>
11
IM 01E21A01-03EN-A
5.9 FOUNDATION eldbus Conguration Tool
(Not applicable for EtherNet/IP communication type. Please read the descriptions on IM 01E22A01-01EN if
necessary.)
5.10 EtherNet/IP Conguration Tool
The Ethernet conguration can connect with this product
from any connection point of RJ-45.
Port 1 and/or Port2 can be used for plant operation and
maintenance of Ethernet communication.
F0514.ai
10 / 100 M bps
PORT2 PORT1
10 /100 M bps
PORT1PORT2
PORT1 Link
/ Activity
PORT2 Link
/ Activity
Module Status
Network Status
MX
Terminal Conguration
NOTE
For maintenance (temporary connection) purpose,
connect RJ-45 Ethernet cable without passing though
the cable hole of device.
Web page can be used for conguration of EtherNet/IP
device. See IM 01E21A02-06EN for details.
Supported software
Operation systems Microsoft Windows 7 or higher
Web browser Internet explorer 8 or higher
Google chrome
Microsoft Edge
Product code/name and EDS le for EtherNet/IP
EDS le is required to connect host application tool for
EtherNet/IP (e.g. PLC). If EDS is not installed in the host
tool, download the correct EDS le from ODVA ofcial
web site and install it, or contact respective vendor of the
host tool.
EDS le is separated by the Product code/name. Conrm
the following table to install the correct EDS le.
AXG4A
Vendor ID 250
Vendor Name Yokogawa Electric Corporation
Product Code 201
Product Name AXG4A Magnetic Flowmeter

YOKOGAWA ADMAG AXG Series Specifications

General

Brand	YOKOGAWA
Model	ADMAG AXG Series
Category	Measuring Instruments
Language	English