YOKOGAWA ADMAG AXG Series User Manual

<4. Wiring>
7
IM 01E21A01-03EN-A
Wiring Procedure
1. Check the product’s power is off, then remove the
terminal cover (transparent).
2. Wire the power supply cable and the functional
grounding cable to the power supply terminals.
3. Install the terminal cover.
Functional grounding cable
Power supply
cable
Integral type or AXG4A remote transmitter
M4 Screw Type for EtherNet/IP communication type
10 /100
M
bps
PORT2 PORT1
10
/
100
M
bps
PORT1PORT2
PORT1 Link
/
Activity
PORT2 Link
/
Activity
Module Status
Network Status
MX
Figure 4.4.1 Power Cable Wiring
4.4.2 DC Power Connection
(Please read the descriptions on IM 01E22A01-01EN.)
4.4.3 Grounding
(Please read the descriptions on IM 01E22A01-01EN.)
4.4.4 Connecting to External Products
(Please read the descriptions on IM 01E22A01-01EN.)
4.4.5 Wiring Procedures
(1) For Integral Flowmeter and AXG4A Remote
Transmitter
(Please read the descriptions on IM 01E22A01-01EN.)
(2) Terminal Conguration
(Integral Flowmeter and AXG4A
Transmitter)
Protective
Grounding Terminal
Protective
Grounding Terminal
Integral Flowmeter AXG4A Remote Transmitter
F0402.ai
Integral Type/AXG4A Remote Transmitter
When the cover is removed, the connection terminals
will be visible.
The description of the terminal symbols is shown in the
following Figure.
<To be wired to Power Supply and PORTs>
M4 Screw Type for EtherNet/IP communication
Communication and I/O code: P0
Description
Terminal Symbol
N/-
L/+
Shorting Screw
(Need to be fixed for normal operation)
Functional Grounding
Power Supply
Ethernet port (RJ-45, 2 ports)
Protective Grounding
(Inside and outside of the terminal box)
PORT1
PORT2
10 / 100 M bps
PORT2 PORT1
10 /100 M bps
PORT1PORT2
PORT1 Link
/ Activity
PORT2 Link
/ Activity
Module Status
Network Status
MX
F0403.ai
Figure 4.4.2 Terminal Conguration (Integral Flowmeter and
AXG4A Remote Transmitter)

YOKOGAWA ADMAG AXG Series Specifications

General

Brand	YOKOGAWA
Model	ADMAG AXG Series
Category	Measuring Instruments
Language	English