YOKOGAWA ProSafe-RS Technical Information

v
TI 32S01J30-01E
 Replacement of fuse
WARNING
• The specied fuse must be used as a replacement.
• Before replacing fuse, conrm if there’s no dangerous gas, and the power supply is OFF.
 Maintenance
WARNING
• The maintenance work should be done only by operators who received special training.
• Use a vacuum cleaner and soft cloth to clean up the equipment.
• At the time of the maintenance work, put on wrist straps and take the measures for
Electrostatic Discharge.
• If the label that indicates Danger is not legible, or if it has peeled o󰀨, order a new label using
part number T9029BX.
• Before starting the maintenance work, conrm if there’s no dangerous gas.
• The maintenance work should be done in accordance with the instructions provided in the
related Installation Guidance and User’s Manuals.
 Drawing Conventions
Some drawings depicted in the user’s manual may be partially emphasized, simplied, or omitted
for the convenience of description.
Trademark
 Trademark Acknowledgments
The names of corporations, organizations, products and logos herein are either registered
trademarks or trademarks of Yokogawa Electric Corporation and their respective holders.
Mar. 27, 2020-00

YOKOGAWA ProSafe-RS Specifications

General

Brand	YOKOGAWA
Model	ProSafe-RS
Category	Industrial Equipment
Language	English