22
Water Leak Sensor 4 Settings:
Alexa
P
You can use the Water Leak Sensor 4 to trigger
Alexa routines. You must have the Alexa app
installed, the YoLink skill installed and
connected to your YoLink app account.
Alexa regards the Water Leak Sensor 4’s four
buttons as motion sensors. Only the
short-press/click button behavior is recognized
by Alexa (you can still use the long-press
behavior for other things as Alexa ignores it) and
in fact, you can still assign a YoLink app function
to this button (although you are probably
unlikely to need to do this). It is not in the scope
of this user guide to cover set up of the Alexa
skill or to cover creating an Alexa routine, so the
IROORZLQJVLPSOLHGLQVWUXFWLRQVDUHSURYLGHG
1. Create a new routine in the Alexa app.
2. In the When This Happens section, select
Smart Home.
3. Find your Water Leak Sensor 4. Each button is
LGHQWLHGZLWKDQBBBBDSSHQGHGWR\RXU
Water Leak Sensor 4’s name. Select the button
that you’d like to assign to this routine.
4. Tap the Detected button. Disregard the other
settings available.
5. Tap Next.
To Next Page
Loading...
Need help?
General
