35
Troubleshooting
X
If your fob does not operate as expected, if the
fob has worked before, but stopped working,
check and replace the batteries, if needed. If the
fob has not worked before, perform the pairing
process as previously explained, then test the
fob again.
If this does not resolve the issue, please contact
our customer support department (see the
contact info on the last page of this guide).
We recommend checking for and performing any
DYDLODEOHUPZDUHXSGDWHVEHIRUHFRQWDFWLQJ
customer support.
Firmware Updates, Continued
W
)LUPZDUHLVOLNHVHWWLQJVLQ\RXUIREWKDWGHQH
the overall operations of the fob, for example,
determining when and how the fob’s sounder
should beep. These settings are added to the fob
when it is manufactured, and they are
periodically updated, as needed, to add
improvements, new features, new integrations,
etc, to your fob, as they become available. If you
use your Water Leak Sensor 4 without an
DVVRFLDWHG<R/LQNKXEUPZDUHXSGDWHVFDQ
not be made on your fob.
To Next Page
Need help?
General
