Page 3
Installation, Operation & Maintenance Manual ( IOPCKKS60220510C1)
95
1570
GENERAL
YORK
®
Saber units are single package air conditioners equipped
with optional factory installed electric heaters and designed for
outdoor installation on a rooftop or steel structure.
The units are completely assembled on a rigid base frame. All
piping, refrigerant charge, and electrical wiring is factory installed
and tested. The units require electric power, duct connections and
drain piping connections at the point of installation.
The supplemental electric heaters have nickel-chrome elements
and utilize single point power connection.
SAFETY CONSIDERATIONS
Due to system pressure, moving parts and electrical components,
installation and servicing of air conditioning equipment can be
hazardous. Only qualified, trained, service personnel should install,
repair, maintain or service this equipment.
Observe all precautions in the literature, on labels and tags
accompanying the equipment whenever working on air conditioning
equipment. Be sure to follow all other safety precautions that
apply.
Wear safety glasses and work gloves, and follow all safety codes.
Use a quenching cloth and have a fire extinguisher available for all
brazing operations.
INSPECTION
As soon as a unit is received, it should be inspected for possible
damage during transit. If damage is evident, the extent of the
damage should be noted on the carrier’s freight bill.
RENEWAL PARTS
Refer to YORK
®
USER’S MAINTENANCE and SERVICE INFORMATION
MANUAL. It is strongly suggested that only genuine YORK
®
Spare
Parts are used to ensure long life, product and operator safety and
efficient working of the unit.
CAUTION
THIS PRODUCT MUST BE INSTALLED IN STRICT COMPLIANCE
WITH THE ENCLOSED INSTALLATION INSTRUCTIONS AND ANY
APPLICABLE LOCAL, STATE, AND NATIONAL CODES INCLUDING,
BUT NOT LIMITED TO, BUILDING, ELECTRICAL, AND MECHANICAL
CODES.
WARNING
IMPROPER INSTALLATION MAY CREATE A CONDITION WHERE
THE OPERATION OF THE PRODUCT COULD CAUSE PERSONAL
INJURY OR PROPERTY DAMAGE.
Installer should pay particular attention to the words :
NOTE, CAUTION and WARNING.
NOTES are intended to clarify or make the installation easier.
CAUTIONS are given to prevent equipment damage.
WARNINGS are given to alert installer that personal injury and/
or equipment damage may result if installation procedure is not
handled properly.
Figure 1: Typical Unit Configuration
To Next Page
Loading...
Need help?
General
