Page 15
User Setup:
Press the SETUP button, then press MODE repeatedly until the Backlight setup
step appears. Use the WARMER or COOLER buttons to make selection. Press
MODE to advance to the next step. Press SETUP to leave the setup screens.
Backlight (Setup Step 3)
Backlight Level (Setup Step 4)
Backlight Off - Backlight turns on with any button press and turns off after 8 seconds.
Backlight On - Backlight is on continuously.
Backlight 6pm to 6am - Backlight turns on at 6pm and turns off at 6am.
The backlight can be adjusted between always off and seven levels of brightness.
Backlight Operation
The thermostat backlight may be set to be always on, on temporarily with any button
press, on throughout the evening, or always off. (For always off, see Backlight Level)
Press the SETUP button, then press MODE repeatedly until the Backlight setup
step appears. Use the WARMER or COOLER buttons to adjust the brightness.
Press MODE to advance to the next step. Press SETUP to leave the setup
screens.
Language (Setup Step 16)
Setup step instructions on the scrolling display can be set for English, Spanish, or
French.
Press the SETUP button, then press MODE repeatedly until the Language setup
step appears. Use the WARMER or COOLER buttons to make selection. Press
MODE to advance to the next step. Press SETUP to leave the setup screens.
To enter Advanced Setup, press the SETUP button, then press MODE. Use the
WARMER or COOLER buttons to adjust the value of your selection. Press
MODE to advance to the next setup step. Press SETUP again to leave the setup
screens.
How to Change Settings in the Setup Screens
SETUP
To Next Page
Loading...
Need help?
General
