EasyManuals Logo
Home>York>Air Conditioner>LX series

York LX series User Manual

York LX series
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
Page 37
TroubleShooting
SYMPTOM: The air conditioning does not attempt to turn on.
CAUSE: The cooling setpoint is set too high.
REMEDY: Lower the cooling setpoint or lower the cooling set-
point limit. See Setpoint Limits (page 22).
SYMPTOM: The air conditioning does not attempt to turn on.
CAUSE: The compressor timer lockout may prevent the air
conditioner from turning on for a period of time.
REMEDY: Consult the Owner's Manual in the Installer Setup
section to defeat the Cycles Per Hour (page 22).
I
Am
Outdoor
COOL SET
HEAT ETS
2:00
78
74
68
85
MO
YOUR NAME
COOLER MODE WARMER
SYMPTOM: The display is blank.
CAUSE: Lack of proper power.
REMEDY: Make sure the power is on to the furnace and that
you have 24vac between R & C.
I
Am
Outdoor
COOL SET
HEAT ETS
2:00
78
74
68
85
MO
YOUR NAME
COOLER MODE WARMER
I
Am
Outdoor
COOL SET
HEAT ETS
2:00
78
74
68
85
MO
YOUR NAME
COOLER MODE WARMER
SYMPTOM: The heating does not attempt to turn on.
CAUSE: The heating setpoint is set too low.
REMEDY: Raise the heating setpoint or raise the heating set-
point limit. See Setpoint Limits (page 22).
I
Am
Outdoor
COOL SET
HEAT ETS
2:00
78
74
68
85
MO
YOUR NAME
COOLER MODE WARMER
SYMPTOM: When controlling a residential heat pump, and
asking for cooling, the heat comes on.
CAUSE: The thermostat reversing valve jumper is set for “B”.
REMEDY: Set the reversing valve jumper for “O”.
I
Am
Outdoor
COOL SET
HEAT ETS
2:00
78
74
68
85
MO
YOUR NAME
COOLER MODE WARMER
SYMPTOM: When calling for cooling, both the heat and cool
come on.
CAUSE: The thermostat equipment jumper is configured for
“HP” and the HVAC unit is a Gas/Electric.
REMEDY: Set the equipment jumper for “Gas”.
I
Am
Outdoor
COOL SET
HEAT ETS
2:00
78
74
68
85
MO
YOUR NAME
COOLER MODE WARMER
SYMPTOM: When the Program button is pressed, the display
reads “DISABLED”.
CAUSE: Program mode is set to “NON PROGRAM”.
REMEDY: Set Program Mode (Setup 1) to 1, 5/2, or 7 Day.
See Selecting Your Program Mode (page 21).
I
Am
Outdoor
COOL SET
HEAT ETS
2:00
78
74
68
85
MO
YOUR NAME
COOLER MODE WARMER

Other manuals for York LX series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the York LX series and is the answer not in the manual?

York LX series Specifications

General IconGeneral
BrandYork
ModelLX series
CategoryAir Conditioner
LanguageEnglish

Related product manuals