Page - 50/85 AF2ZP0CL - ACE2 - User Manual
9) RELEASE BRAKING
Seconds. It controls the deceleration ramp when the travel request is
released. The parameter sets the time needed to decelerate the traction
motor from 100Hz to 0Hz.
10) INVERSION BRAKING
Seconds. It controls the deceleration ramp when the direction switch is
inverted during travel. The parameter sets the time needed to decelerate the
traction motor from 100Hz to 0Hz.
11) DECELERATION BRAKING
Seconds. It controls the deceleration ramp when the accelerator has turned
down but not completely released. The parameter sets the time needed to
decelerate the traction motor from 100Hz to 0Hz.
12) PEDAL BRAKING
Seconds. It controls the deceleration ramp when the pedal position is
changed but not completely released. The parameter sets the time needed to
decelerate the traction motor from 100Hz to 0Hz.
13) SPEED LIMIT BRK
Seconds. It controls the deceleration ramp when a speed reduction has been
activated. The parameter sets the time needed to decelerate the traction
motor from 100Hz to 0Hz.
14) TIL. REL. BRAKING
Seconds. It controls the deceleration ramp when the tiller is released. The
parameter sets the time needed to decelerate the traction motor from 100Hz
to 0Hz.
15) MAX SPEED FORW
It determines the maximum speed in forward direction.
16) MAX SPEED BACK
It determines the maximum speed in backward direction.
To Next Page
Need help?
General
