Zapi ACE2 User Manual

AF2ZP0CL - ACE2 - User Manual Page - 69/85
Flow Chart showing how to use the ALARMS function via the Digital Console.
1) Opening Zapi Display.
AE2T2B ZP0.12
24V 400A 00000
2) Press ENTER to go into the General menu.
' % '
' ' '
3) The Display will show:
MAIN MENU
PARAMETER CHANGE
4) Press ROLL UP or ROLL DOWN button until
PARAMETER CHANGE appears on the display.
% ' '
% ' '
5) The Display will show:
MAIN MENU
ALARMS
6) Press ENTER to go into the ALARMS function.
' % '
' ' '
7) The Display will show the most recent Alarm.
CODE
00005 #02 20°C
8) Each press of the ROLL UP button brings up
following Alarms. Pressing ROLL DOWN returns to
the most recent.
% ' '
% ' '
9) If an Alarm has not occurred, the Display will
show: ALARM NULL.
CODE
00007 #03 18°C
10) When you have finished looking at the Alarms,
press OUT to exit the ALARMS menu.
' ' '
' % '
11) The Display will ask “CLEAR LOGBOOK?”.
CLEAR LOGBOOK?
YES=ENTER NO=OUT
12) Press ENTER for yes, or OUT for NO.
' % '
' ' '
' ' '
' % '
13) Press OUT to return to the Opening Zapi
Display.
' ' '
' % '
8.15 Faults diagnostic system
The fault diagnostic system of ACE-2 controller is divided into 2 main groups of
faults:
ALARMS: these are the faults which open the power section, which means the
power bridge is opened and, when possible, the LC is opened and EB is applied.
These are faults related to:
- failures in the motor/controller that the power system is not anymore able to
drive the truck
- safety related failures

Zapi ACE2 Specifications

General

Brand	Zapi
Model	ACE2
Category	Inverter
Language	English