Page 46
4.7 PROGRAMMING CONSOLE FUNCTIONS
- Functional configuration (see 4.1 , 4.2 , 4.3 , 4.4)
- Parameter programming (see 4.5 , 4.6)
- Tester: the user can verify the state of the following parameters:
TRACTION PUMP
motor voltage (%) motor voltage (%)
frequency (Hz) frequency (Hz)
encoder (Hz) encoder (Hz)
slip value (Hz) slip value (Hz)
current rms (A) current rms (A)
temperature (°C) temperature (°C)
motor temperature (°C) motor temperature (°C)
accelerator (V) accelerator (V)
forw. switch (ON/OFF) lifting switch (ON/OFF)
back. switch (ON/OFF) 1st speed switch (ON/OFF)
inching forw. (ON/OFF) 2nd speed switch (ON/OFF)
inching back. (ON/OFF) 3rd speed switch (ON/OFF)
cutback switch (ON/OFF) 4th speed switch (ON/OFF)
brake switch (ON/OFF) hydro speed req. (ON/OFF)
seat switch (ON/OFF) voltage booster (V)
exclusive hydro (ON/OFF) battery voltage (V)
hand brake (ON/OFF) cos fi
voltage booster (%) battery current (A)
battery voltage (V) battery charge (%)
cos fi
battery current (A)
battery charge (%)
- Save function (for storing data)
- Restore function (for loading parameters on another chopper)
- Display of the last 5 alarms including hour-meter value and temperature at the moment
of the alarm.
- Accelerator range programming: records the minimum and maximum useful accelerator
stroke values for both direction of running.
- See the console manual for a detailed description of function and parameters.
To Next Page
Loading...
Need help?
General
