Zebra Symbol DS7708 User Manual

18 DS7708 2D VERTICAL SLOT SCANNER
Scanned data is
incorrectly
displayed on the
host.
Scanner is not
programmed to work
with the host. Check
scanner host type
parameters or
editing options.
Ensure proper host is selected.
For RS-232, ensure the
scanner’s communication
parameters match the host’s
settings.
For Keyboard Wedge, ensure
scanner is programmed with the
correct country code and that the
CAPS LOCK key is off.
Ensure editing options (for
example., UPCE to UPCA
Conversion) are properly
programmed.
USB host not
functioning properly.
Scanner does not
recognize host.
Remove and reinsert the USB
cable and the external power
supply, if applicable.
NOTE If the symbol still does not scan, contact the distributor or call
Zebra Technologies Support. See the back cover for contact
information.
Problem Possible Causes Possible Solutions

Zebra Symbol DS7708 Specifications

General

Brand	Zebra
Model	Symbol DS7708
Category	Barcode Reader
Language	English