EasyManuals Logo
Home>Zephyr>Ventilation Hood>Cyclone AK6500BS

Zephyr Cyclone AK6500BS User Manual

Zephyr Cyclone AK6500BS
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
31
Typhoon, Hurricane, & Cyclone Use, Care, and Installation Guide
ZEPHYRONLINE.COM
ACT™ Conversion
ůĬĻĭ
Some local codes limit the maximum amount of CFM a range hood can move. ACT™ allows you
to control the maximum blower CFM of select Zephyr Ventilation range hoods without the need for
expensive make up air kits. ACT™ enables the installer to easily set the maximum blower speed to
one of two most commonly specified CFM levels; 390 or 290 CFM. The usage of ACT™ may not be
necessary for your installation. Please check your local codes for CFM restrictions.
Hood must be disconnected from the main power prior to
performing the conversion instructions listed below. Failure to do
so could result in personal injury or damage to the product.
CAUTION
After re-positioning the jumper and powering on the hood, the
CFM cannot be changed again.
CAUTION

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zephyr Cyclone AK6500BS and is the answer not in the manual?

Zephyr Cyclone AK6500BS Specifications

General IconGeneral
Colorstainless steel
Hood Typeunder cabinet
Venting Typeducted
Number of Fan Speeds3
Interior Lightyes
Voltage120 volts
Current2.4 amperes
Weight and Dimensions IconWeight and Dimensions
Depth22 1/5 inches
Height6 2/5 inches
Width29 4/5 inches
Net Weight64.7 pounds

Related product manuals