Zephyr Siena User Manual

11
Installation – Horizontal Ducting Conversion
6. Attach motor to back of hood body by (8)
screws.
7. From outside hood body, attach top cover plate
to top of hood body using (4) M4 x 8 screws.
5. Position blower with brackets as shown. Be sure
to tuck back of blower bracket into tabs at back of
hood. Secure single blower plate to back of hood
using (4) screws removed from step 2.

Zephyr Siena Specifications

General

Brand	Zephyr
Model	Siena
Category	Ventilation Hood
Language	English