15
SURFACE MAINTENANCE:
Do not use corrosive detergents, abrasive detergents or oven cleaners.
Do not use any product containing chlorine bleach or any product containing chloride.
Do not use steel wool or abrasive scrubbing pads which will scratch and damage surface.
Cleaning Stainless Steel
Clean periodically with warm soapy water and clean cotton cloth or micro ber cloth. Always rub in the
direction of the stainless steel grain. To remove heavier grease build up use a liquid degreaser detergent.
After cleaning use a non-abrasive stainless steel polish/cleaners, to polish and bu out the stainless luster
and grain. Always scrub lightly, with clean cotton cloth or micro ber cloth and bu in the direction of the
stainless steel grain.
Hybrid Bae Filters
The hybrid bae lters installed by the factory are intended to lter out residue and grease from cooking.
They need not be replaced on a regular basis but are required to be kept clean.
Remove and clean by hand or in dishwasher using a non-phosphate detergent. Discoloration of the lter
may occur if using phosphate detergents, or as a result of local water conditions - but this will not aect
lter performance. This discoloration is not covered by the warranty. Spray degreasing detergent and leave
to soak if heavily soiled.
Dry lters and re-install before using hood.
Removing Bae Filters
1. Push in on spring loaded handle
2. Pull down on lter hande to remove lter
Maintenance – Cleaning, Filter Care, Parts List
LIST OF PARTS AND ACCESSORIES
DESCRIPTION PART#
Replacement Parts
Bae Filter (each) 50200050
Optional Accessories
Recirculating Kit ZRC-00SI
Replacement Charcoal Filter (each) Z0F-C091
Duct Cover Extension Kit Z1C-00SI
Universal Make-Up Air Damper MUA008A
To order parts, visit us online at http://store.zephyronline.com or call us at 1.888.880.8368
To Next Page
Loading...
Need help?
General
