Zephyr Vortex AK9028BS User Manual

21
Vortex Use, Care, and Installation Guide
ZEPHYRONLINE.COM
Troubleshooting
The hood is not
venting out properly.
Using the wrong size of ducting. Change the ducting to the correct size
The hood might be hanging to
high from the cook top.
Adjust the distance between the cooktop
and the bottom of the hood within 24”
to 36” for gas cooktops and 20” to 36”
for electric cooktops.
The wind from the opened
windows or opened doors in the
surrounding area are aecting
the ventilation of the hood.
Close all the windows and doors to
eliminate the outside wind flow.
Blockage in the duct opening or
ductwork.
Remove all the blocking from the duct
work or duct opening.
Filter is vibrating. Filter is loose. Adjust or change the filter.
Spring clip is broken on the filter. Change the spring clip.
Possible Problem Possible Cause Solutions

Zephyr Vortex AK9028BS Specifications

General

Color	stainless steel
Hood Type	insert
Venting Type	convertible
Temperature Sensor	no
Sones	5 sones
Control Type	slide
Delay Start	no
Interior Light	yes
Remote Control	no
Voltage	120 volts

Weight and Dimensions

Depth	17 1/2 inches
Height	19 1/10 inches
Width	28 3/8 inches
Net Weight	32.6 pounds