Zte Blade A7 2020 User Manual

25
Using Do Not Disturb Mode
You can limit interruptions with Do Not Disturb mode. This mode
can mute sound, stop vibration, and block visual disturbances.
You can pick what you block and what you allow.
Turn On or Off Do Not Disturb Mode
1. Swipe down from the top of the screen with two fingers to
access the Quick Settings.
2. Find and touch Do not disturb.
NOTE:
You can open the app list and touch Settings > Apps &
notifications > Notifications > Do Not Disturb to access the
Do Not Disturb setting screen.
Set What to Block or Allow
1. Swipe down from the top of the screen with two fingers to
access the Quick Settings.
2. Touch and hold Do not disturb.
3. Under the Behavior section, choose what to block or allow.
 Sound & vibration: Block or allow alarms, media, or
touch sounds.
 Notifications: Have no sounds from notifications, or no
sounds and no visuals. Or set custom restrictions.

Zte Blade A7 2020 Specifications

General

Display Size	6.09 inches
Resolution	720 x 1560 pixels
Processor	Unisoc SC9863A
Battery Capacity	4000 mAh
Operating System	Android 9.0 (Pie)
Display Type	IPS LCD
SIM	Dual SIM (Nano-SIM, dual stand-by)
RAM	2GB
Internal Storage	32 GB
Front Camera	5MP
Rear Camera	16MP + 8MP + 2MP (Triple Camera)