50
• Default Policy: Set how to handle the packet if none
of the rules matches.
Accepted: Internet trafc is allowed by default. Only
traffic from the selected applications will be blocked
from accessing the Internet. Traffic is identified by
port numbers. In particular, you need to know the
port numbers and the protocol (TCP, UDP) used by
outgoing trafc.
Dropped: Internet traffic is blocked by default.
Only traffic from the selected pre-defined or custom
applications is allowed to access the Internet.
• MAC Address: Set the MAC address that will be
ltered.
• Source IP Address: Set the source IP address that
will be ltered.
• Dest. IP Address: Set the destination IP address that
will be ltered.
• Protocol: Set which protocol will be used for ltering.
• Action: Set how to handle the packet if it matches with
the rule.
• Comment: Type comment for the lter settings.
To Next Page
Loading...
Need help?
General