Zte MF65 Quick Start Guide

10 11
NOTE:
You may need to input the password for Wi-Fi connection. Please check the la-
bel on your device to get the default.
5. Wait a moment, and then the client will connect to your device successfully.
Via USB Cable
1. Connect to the device.
2. Power on your device.
3. The OS detects and recognizes new hardware and nishes the installation
automatically.
NOTE:
If the system does not launch installation automatically, you can run the installa-
tion program in path of My Computer > GP Modem.
4. Wait a moment, and then the client will connect to your device successfully.
Accessing the Internet
3G Mode
After the client connected to your device successfully, you can access the Inter-
net in the Automatic or Manual mode. The default mode is Automatic.
Mode Operations
Automatic
Your device will connect to the Internet automatically, and
your clients can surf on the Internet directly.
Manual
Log in the webGUI conguration page, and select Settings >
3G Settings > Network Select > WAN Connection Mode >
Manual, and then click Connect or Disconnect.
NOTE:
If you want to modify the detailed parameters of your device, please log in the
webGUI conguration page by visiting http://192.168.0.1 or http://m.home. The
default password is admin.

Zte MF65 Specifications

General

Type	Mobile
Networking features	HSDPA/3G UMTS/GSM
DC-in jack	Yes
Internal	No
Number of WLAN connections (max)	5
Maximum data transfer rate	21.6 Mbit/s
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n

Weight and Dimensions

Weight	75 g
Dimensions (WxDxH)	50 x 13.7 x 102 mm