12
Advanced Settings
This chapter provides information on how to configure advanced settings for
various aspects of the device such as APN settings, firewall settings, SIM PIN,
etc.
NOTE:
Please disconnect the MF861 from the network before changing the settings.
Configure APN details
The APN is checked to determine the type of network connection to establish.
Your MF861 comes preconfigured with the APN (Access Point Name) for AT&T.
To add an APN for another network:
1. On the AT&T USB Modem configuration page.
2. Click Settings > Network.
3. Click Manual in the APN Settings section.
4. Click Add.
5. In the blank line, enter the profile name, APN (obtained from your carrier).
6. Select the PDP type.
7. Select the DNS mode. If set to Manual DNS, you need to enter Primary DNS
or Secondary DNS(optional).
8. Select the network Authentication mode. The options are:
To Next Page
Loading...
Need help?
General
