6
Properly Remove the MF861 from Your Computer
Be sure to disconnect from the network and quit the AT&T USB Modem before
you remove the device from your computer.
The MF861 allows you to safely remove the device at any time when you are
not connected to the network.
1. Click Off next to Standard Data, and then click Apply in the Data Connection
section to disconnect from the network.
2. Exit and close the AT&T USB Modem.
3. Gently grip the MF861 on both sides and pull straight out to avoid damaging
the USB connectors.
To Next Page
Loading...
Need help?
General
