19
Settings (default 10minutes) and no action is performed to the device,
the device will enter the sleeping mode with all the OLEDs off. In the
sleeping mode, the Wi-Fi function will be disabled.
Usage of WPS
If your client device supports WPS, you need not to input the pass-
word manually after WPS has been available. Please do the follow-
ing:
1. Start up your device.
2. Launch the client device connected to your device.
3. Enable the WPS function of your device.
4. Enable the WPS function of the client.
Notes:
For the detailed operations about the client, please refer to the client’
s instruction.
Warning and Notice
To the Owner
• Some electronic devices are susceptible to electromagnetic inter-
ference sent by your device if inadequately shielded, such as the
electronic system of vehicles. Please consult the manufacturer of
your device before using if necessary.
• Operating of laptop and desktop PCs and your device may in-
terfere with medical devices like hearing aids and pacemakers.
To Next Page
Loading...
Need help?
General
