8
Getting to know your phone
Charging the Battery
Connect the charger to the phone using a USB cable, and plug the charger into a standard
power socket. Only use the approved charger and USB lead provided.
Always insert the charger lead carefully.
Check the plug and socket are aligned correctly.
Do NOT use excessive force which may damage the USB port.
Be careful to avoid tripping on the lead whilst it is plugged in.
Physical damage to the USB port is not covered by warranty.
Switch your phone on.
After inserting the SIM card, replace the battery and the back cover. Then press and hold
the Red key for 2 seconds to switch the handset on.
The phone will be ready to use after a short time.
To Next Page
Loading...
Need help?
General
