8
NOTE:
The “Phone 2” port can be used to connect an additional phone.
This port uses the same telephone number as the “Phone 1” port.
Put the device at least 2.5 meters away from the connected phone,
TV sets, radio and other electronic devices to avoid electromagnetic
interference.
Turning on Your Device
Press and hold the power button about 8 seconds until the signal
strength light comes on.
Checking the Wireless Signal
1. Raise antenna to an upright position.
2. Conrm signal strength light is green for optimal performance.
NOTE: If there is a yellow light, please change the installation location.