To Next Page

To Previous Page

Chapter4ServiceConguration

4.2.25setportprotect

Purpose

Thiscommandenablesordisablestheportprotectionfunction.

CommandMode

Allcongurationmodes

Syntax

setport<portlist>protect{enable|disable}

ParameterDescription

[<portlist>]Portlist.

enableEnablestheportprotectionfunction.

disableDisablestheportprotectionfunction.

Guidelines

Aftertheportprotectionfunctionisenabled,whenthenumberofdowntimesisgreater

thanorequalto3within30seconds,theportwillbeblockedforaprotectionperiod.After

theprotectionperiodexpires,theportbecomesactiveagain.

Default

Theportprotectionfunctionisdisabled.

Example

Thefollowingexampleenablestheportprotectionfunctionforports1,5,6,7,and11:

zte(cfg)#setport1,5-7,11protectenable

4.2.26setportprotecttime

Purpose

Thiscommandsetstheportprotectionperiod.

CommandMode

Allcongurationmodes

Syntax

setport<portlist>protecttime<1-10>

4-61

SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential

Other manuals for Zte ZXR10 5250-28TC

Questions and Answers:

Need help?

Do you have a question about the Zte ZXR10 5250-28TC and is the answer not in the manual?

General

Model	ZXR10 5250-28TC
Category	Switch
Manageable	Yes
VLANs	4K
Jumbo Frame	9K
Storage Temperature	-40°C to 70°C
Power Supply	AC 100-240V
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1w, IEEE 802.1d, IEEE 802.1s
Routing Protocol	Static Routing
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)