ACS 502 Installation & Start-up Manual 2-1
Chapter 2 – Overview of the ACS 502/504
The ACS 502 and ACS 504 are adjustable frequency AC drives for 50 to 300
hp constant torque and 60 to 400 hp variable torque, 480 volt applications;
and 60 to 150 hp constant torque and 75 to 200 hp variable torque, 600 volt
applications. The ACS 504 is an open chassis, designed for mounting into a
customer’s enclosure. The ACS 502 is a complete enclosed assembly
(including the ACS 504 module) ready for operation.
This chapter describes the features and functions of the ACS 502, and
includes illustrations and block diagrams. It also describes the ACS 502
hardware components and the Control Panel displays and keys. This chapter
also presents an overview of the Parameters menu system and Application
macros.
Nameplate
Identification
Figure 2-1 explains the base drive part number used to derive the drive code
printed on the nameplate, located at on the right side of the enclosure, or
inside the door of the ACS 502, or on the left side below the brake terminals
on the ACS 504.
To Next Page
Loading...
Need help?
General
