Other information
Protection classes
IP10Degree of protection
(IEC/EN 60529)
UL Open TypeEnclosure type (UL 508C)
IIOvervoltage category
(IEC 60664-1)
IProtective class
(IEC/EN 61800-5-1)
IIProtective class
(IEC 62109-1)
Ambient conditions
0…70 °C (32…158 °F)Air temperature in opera-
tion
Materials
Hot-dip zinc coated steel, cover paintedHousing
PolycarbonateLabel
CardboardPackage
Applicable standards
Adjustable speed electrical power drive systems. Part 5-1: Safety requirements
– electrical, thermal and energy
EN 61800-5-1:2007
Adjustable speed electrical power drive systems. Part 3: EMC requirements
and specific test methods
EN 61800-3:2004
Safety of power converters for use in photovoltaic power systems Part 1:
General requirements
IEC/EN 62109-1:2010
UL Standard for Safety, Power Conversion Equipment, third editionUL508C:2002
For other standards, refer to the applicable hardware and functional safety manuals.
Markings
The control unit is cULus Listed.cULus
Cyber security disclaimer
This product is designed to be connected to and to communicate information and
data via a network interface. It is Customer's sole responsibility to provide and
continuously ensure a secure connection between the product and Customer network
or any other network (as the case may be). Customer shall establish and maintain any
appropriate measures (such as but not limited to the installation of firewalls,
application of authentication measures, encryption of data, installation of anti-virus
programs, etc.) to protect the product, the network, its system and the interface
against any kind of security breaches, unauthorized access, interference, intrusion,
leakage and/or theft of data or information.
ABB and its affiliates are not liable for damages and/or losses related to such security
breaches, any unauthorized access, interference, intrusion, leakage and/or theft of
data or information.
Technical data 35
To Next Page
Loading...
Need help?
General
